The Best Cisco 350-501 Study Guides and Dumps of 2022
Top Cisco 350-501 Exam Audio Study Guide! Practice Questions Edition
NEW QUESTION 82
Which QoS model allows hosts to report their QoS needs to the network?
- A. MQC
- B. IntServ
- C. DiffServ
- D. CB-WFQ
Answer: B
Explanation:
Section: Architecture
Explanation/Reference:
Explanation:
IntServ follows the signaled-QoS model, where the end-hosts signal their QoS needs to the network.
Reference:
https://www.cisco.com/en/US/technologies/tk543/tk766/technologies_white_paper09186a00800a3e2f.html
NEW QUESTION 83
What do Ansible and SaltStack have in common?
- A. They both use DSL configuration language.
- B. They both can be designed with more than one master server.
- C. They both have agents running on the client machine.
- D. They both use YAML configuration language.
Answer: D
Explanation:
Section: Automation and Assurance
Explanation
Explanation/Reference: https://www.edureka.co/blog/chef-vs-puppet-vs-ansible-vs-saltstack/
NEW QUESTION 84
Refer to the exhibit.
A network engineer is deploying SNMP configuration on client's routers. Encrypted authentication must be included on router 1 to provide security and protect message confidentially. Which action should the engineer perform on the routers to accomplish this task?
- A. snmp-server user testuser group 1 remote 192.168.0.254 v3 auth md5 testpassword
- B. snmp-server community public
- C. snmp-server host 192.168.0.254 informs version 3 auth testuser config.
- D. snmp-server group group 1 v3 auth.
Answer: A
NEW QUESTION 85
A network engineer is configuring Flexible NetFlow and enters these commands
What are two results of implementing this feature instead of traditional NetFlow? (Choose two.)
- A. CPU and memory utilization are reduced.
- B. Only the flows of top 100 talkers are exported.
- C. The data export flow is more secure
- D. The number of packets to be analyzed are reduced.
- E. The accuracy of the data to be analyzed is improved.
Answer: A,D
NEW QUESTION 86
Refer to the exhibit:
Which effect of this configuration is true?
- A. The two routers successfully form a neighbor relationship
- B. The two routers fail to form a neighbor relationship because their system IDs are different.
- C. The two routers fail to form a neighbor relationship because the authentication configuration is missing
- D. The two routers fail to form a neighbor relationship because they have different ISIS area types.
Answer: A
NEW QUESTION 87 
Refer to the exhibit. If router A is the RP, which PIM mode can you configure so that devices will send multicast traffic toward the RP?
- A. PIM-DM
- B. BIDIR-PIM
- C. PIM-SM
- D. PIM-SSM
Answer: C
Explanation:
Section: Services
NEW QUESTION 88
A network operator needs to implement PIM-SSM multicast configuration on customer's network so that users in different domains are able to access and stream live traffic. Which two actions must the engineer perform on the network to make the streaming work? (Choose two.)
- A. Enable PM dense mode on the device.
- B. Enable IGMP version 3 at the interface level.
- C. Enable PIM sparse mode on the device.
- D. Configure a! leas! one MSDP peer on the network
- E. Enable IGMP version 2 at the interface lever.
Answer: B,D
NEW QUESTION 89
Which configuration mode do you use to apply the mpls ldp graceful-restart command in IOS XE Software?
- A. MPLS
- B. MPLS LDP neighbor
- C. global
- D. interface
Answer: C
Explanation:
Section: Architecture
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_ha/configuration/xe-3s/mp-ha-xe-3s-book/ mp-ldp-grace-rstrt.html
NEW QUESTION 90 
Refer to the exhibit. Router 4 is added to the network and must be in the same area as router 1. Which NET should the engineer assign?
- A. 49.0111.0000.0000.0001.00
- B. 49.0001.0000.0000.0004.00
- C. 49.0011.0000.0000.0002.00
- D. 49.0011.0000.0000.0003.00
Answer: D
Explanation:
Section: Networking
NEW QUESTION 91
Refer to the exhibit:
Which condition must be met by the OSPF peer of router R1 before the two devices can establish communication?
- A. The interface on the OSPF peer may have a different key ID, but it must use the same key value as the configured interface
- B. The OSPF peer must be configured as an OSPF stub router
- C. The OSPF peer must use clear-text authentication
- D. The interface on the OSPF peer must use the same key ID and key value as the configured interface
Answer: A
NEW QUESTION 92
Refer to the exhibit:
What is the URL used for with REST API?
- A. It is used to contact a URL filter to determine the efficacy of a web address
- B. It is used to initiate an FTP session to save a running configuration of a device.
- C. It is used to send a TACACS+ authentication request to a server
- D. It is used to send a message to the APIC to perform an operation on a managed object or class operator
Answer: D
NEW QUESTION 93
Which statement about VRF Lite is true?
- A. MPLS label switching and the MPLS control plane are unsupported in the VRF Lite implementation.
- B. It extends the PE functionality to a CE by using VLAN SVI connectivity between the PE and CE, a VLAN mapping to the MPLS label separates data packets between VRFs.
- C. It is an IPv6 transition mechanism that facilitates IPv6 transport across an MPLS network, based on IPv4 prefixes
- D. It allows multiple customers to share one CE, which maintains separate VRF tables by using RT information that it learns from PEs.
Answer: A
NEW QUESTION 94
An engineer is developing a configuration script to enable dial-out telemetry streams using gRPC on several new devices. TLS must be disabled on the devices.
Which configuration must the engineer apply on the network?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION 95
Refer to the exhibit.
An engineer wants to determine which paths are best, second best, third best, and fourth best. Drag and drop the peer addresses on the left to the corresponding BGP best-path selection order on the right.
Answer:
Explanation:
NEW QUESTION 96
Refer to the exhibit:
Which statement supports QPPB implementation?
- A. QoS policies rely exclusively on BGP attributes to manipulate traffic
- B. QPPB policies affect only egress traffic
- C. QoS policies use BGP to gain full coverage on the network.
- D. QoS policies are identified in the MPLS forwarding table
Answer: A
NEW QUESTION 97
When configuring traffic engineering tunnels in Cisco MPLS core network, a network engineer sees the traffic is not taking the expected path in the core. Which command must the engineer use to quickly check path of a TE tunnel?
- A. Ping <tunnel destination IP>
- B. traceroute <tunnel destination IP>
- C. show mpls traffic-engineering tunnels
- D. traceroute mpls ipv4 <tunnel destination>
Answer: C
NEW QUESTION 98
Refer to the exhibit.
A network engineer notices that router R2 is failing to install network 172.16.33.1/32 in the routing table.
Which configuration must the engineer apply to R2 to fix the problem?
- A. R2(config)# access-list 1 permit 172.16.33.0 255.0.0.0
- B. R2(config)# access-list 1 permit 172.16.33.0 0.0.0.255
- C. R2(condg)# access-list 1 permit 172.16.33.0 255.255.255.0
- D. R2(condg)# access-list 1 permit 172.16.33.0 255.255.0.0
Answer: B
NEW QUESTION 99
Drag and drop the LDP features from the left onto the correct usages on the right.
1: graceful restart 2: IGP synchronization 3: session protection 4: targeted-hello accept
Answer:
Explanation:
NEW QUESTION 100
Refer to the exhibit:
This configuration is being applied on an IOS XR router.
Which statement about this configuration is true?
- A. It is used to identify traps for SNMP polling
- B. It is used to create a sensor-group and has a list of YANG models for streaming
- C. It is used to identify MIB entries and has a list of YANG models
- D. It is used to create a subscription to specify the streaming interval
Answer: B
NEW QUESTION 101
......
Valid 350-501 Exam Updates - 2022 Study Guide: https://certmagic.surepassexams.com/350-501-exam-bootcamp.html