[Aug 28, 2024] SurePassExams NACE-CIP2-001 Exam Practice Test Questions (Updated 100 Questions)
Pass NACE NACE-CIP2-001 Exam Info and Free Practice Test
To be eligible for the NACE-CIP2-001 certification, candidates must have a minimum of 2 years of experience in the coatings industry and have completed the NACE-CIP1 certification. Additionally, candidates must pass a rigorous examination that covers a wide range of topics related to coating inspection, including surface preparation, coating application, coating inspection techniques, and quality control.
To be eligible to take the NACE-CIP2-001 exam, candidates must have a minimum of two years of experience in the coatings and corrosion prevention industry. Candidates who pass the exam will receive a certification from NACE, which is recognized globally as a symbol of expertise and excellence in the field of coating inspection.
NEW QUESTION # 53
When performing testing in accordance with ASTM D 2583 the inspector may observe:
- A. Adhesion failure
- B. Cold flow or creep
- C. Glue failure
- D. Cohesion failure
Answer: B
NEW QUESTION # 54
Coating surveys may include which steps?
Select All That Apply:
- A. Schedule the remedial work
- B. Develop a survey plan
- C. Summarize the collected data
- D. Evaluate the coatings performance
Answer: A,B,C,D
NEW QUESTION # 55
Centrifugal blast cleaning requires:
- A. A large volume of air to propel the abrasive
- B. Very large nozzles
- C. The use of single use abrasives
- D. Well maintained blast wheels
Answer: D
NEW QUESTION # 56
Cold-applied tape
- A. have a cross-linked polyethylene backing and a heat-activated adhesive.
- B. are identifiable by its distinct colors, usually light blue, green, Or Grey.
- C. is typically green or led and looks like "painted" finish.
- D. is polyethylene film, heat laminated, 'With an adhesive layer of butyl glue.
Answer: D
NEW QUESTION # 57
A failure caused by applying a coating too thinly is known as
- A. failure to cure.
- B. cracking.
- C. pinholes.
- D. chalking.
Answer: C
NEW QUESTION # 58
Linings are used on the interior of pipelines to
- A. reduce magnetic polarity.
- B. provide protection against soil chemicals.
- C. afford limited temperature insulation.
- D. protect the transported product.
Answer: D
NEW QUESTION # 59
Which product, is used in conjunction with other coatings such as FBE when the lines run through wetlands or a body of water?
- A. Coal Tar Enamel
- B. 2-Layet Polyethylene (PE)
- C. 3-Layet Polyethylene (PE)
- D. Concrete
Answer: D
NEW QUESTION # 60
From a corrosion perspective, the main difference between Ferrous and Non-Ferrous Metals is:
- A. Cost
- B. Iron content
- C. Safety
- D. Appearance
Answer: B
NEW QUESTION # 61
Surface preparation of concrete is performed using:
- A. Methods that are completely different to steel
- B. Methods that are the same as wood
- C. Methods that are exactly the same as steel
- D. Methods that have been modified for concrete
Answer: D
NEW QUESTION # 62
The Concrete Repair Institute's comparators can be used to assess:
- A. Surface cleanliness prior to coating
- B. Surface profile prior to coating
- C. Compressive and tensile strength prior to coating
- D. Contamination levels prior to coating
Answer: B
NEW QUESTION # 63
In which type of concrete are laitance commonly encountered?
- A. Concrete block (poured with a form)
- B. Gunite
- C. Glass fiber cement
- D. Poured (wet cast)
Answer: D
NEW QUESTION # 64
When performing a hardness test on a coating which has elastic properties the inspector is likely to likely to observe:
- A. A very high reading
- B. No difference from any other coating
- C. A very low reading
- D. Cold flow or creep
Answer: D
NEW QUESTION # 65
Which type of pipelines collect the gas from the transmission system so utility companies can distribute the gas to end users?
- A. Gathering
- B. Distribution
- C. Midstream
- D. Transmission
Answer: B
NEW QUESTION # 66
External coatings applied to buried pipelines are generally tested for:
- A. Cathodic disbondment
- B. Gloss level
- C. Solvent resistance
- D. Chalking resistance
Answer: A
NEW QUESTION # 67
As a NACE Level 2 Inspector on a field job; prior to submission your documentation should always reviewed and approved by:
- A. A NACE Level 1 Inspector
- B. A NACE Protective Coating Specialist
- C. Another NACE Level 2 Inspector
- D. A NACE Level 3 Inspector
Answer: D
NEW QUESTION # 68
Dehumidification is defined as the removal of moisture vapor from the air to
- A. lower its dew point,
- B. raise its relative humidity.
- C. lower its temperature
- D. provide worker comfort.
Answer: A
NEW QUESTION # 69
......
The Coating Inspector Level 2 Exam is intended for individuals who have a minimum of two years of experience in the coating inspection field, including surface preparation, coatings application, and inspection techniques. NACE-CIP2-001 exam covers a variety of topics, including coating types and properties, surface preparation, coating application methods, inspection techniques, and safety procedures.
Pass Your NACE Exam with NACE-CIP2-001 Exam Dumps: https://certmagic.surepassexams.com/NACE-CIP2-001-exam-bootcamp.html