We're so confident of our products that we provide no hassle product exchange.
EMC Dell PowerSwitch Campus Deploy 2023 Sample Questions:
1. A switch interface has been properly configured for static port security with one defined allowable MAC address. However, when the network administrator plugs a switch into that port, multiple devices are still allowed access to the network.
Where must port security also be enabled to have an effect?
A) Enabled on all switches in the network
B) Enabled on all interfaces of the switch
C) Enabled globally on the switch
D) Enabled on all attached devices
2. In a PoE environment, what information does the Network Policy TLV exchange between the PSE and PD?
A) VLAN ID, IEEE Priority, and DSCP Value
B) DSCP Value, Required Power, and IEEE Priority
C) IEEE Priority, Required Power, and VLAN ID
D) Required Power, VLAN ID, and DSCP Value
3. A network administrator is planning a PoE budget for their network.
What is the PoE source maximum power budget for a Class 4 end device?
A) 12.95 watts
B) 15.4 watts
C) 34.2 watts
D) 60 watts
4. Why would a network administrator select MLAG for two switches versus stacking?
A) MLAG switches have a shared management IP address.
B) MLAG switches can be upgraded independently from each other.
C) MLAG switches can have VLANs with both redundant and non-redundant ports.
D) MLAG is compatible with Cisco vPC and VSS, and OS10 VLT.
5. A network administrator is having trouble successfully upgrading the firmware on a Dell EMC N-Series switch.
Which transfer protocol should be the last option if all others are not responding?
A) XMODEM
B) HTTP
C) FTP
D) TFTP
Solutions:
| Question # 1 Answer: C | Question # 2 Answer: A | Question # 3 Answer: C | Question # 4 Answer: B | Question # 5 Answer: A |
By Cecil
